Fecon Australia offers a full line of tree stump grinders — also known as “stumpers”— for posi tracks, skid steers, small to large prime movers, and excavators.
For excavators, the reach, mobility, and precise control using the curling action of the arm make it the ideal platform for stump grinding. With Fecon excavator stump grinders, the operator always has a full view of the disk and stump.
Alternatively, our hydraulic machine stump grinders can be matched with most brands of high horsepower, high-flow skid steers and loaders.
Fecon Australia provides full support to ensure you are getting the best model and hydraulic protection for your carrier.
FECON STUMP GRINDERS (STUMPERS) – STUMPEX & STUMP HOG
STUMPEX
Our Stumpex models offer an alternative auger-style rotational grinding method This shaves the stump into a fine end product with extreme efficiency and low disturbance.
The slow rotation, high torque attachment can grind 25 to 81cm diameter stumps down 50cm in just 90 seconds without flinging cuttings in a wide arc. Using a screw tip work tool and down pressure, the Stumpex first secures itself into the stump and then quickly cuts it from the center using two flail cutting edges.
In comparison with a typical stump grinder that turns around 700 to 800 rpms, the Stumpex has a large reduction gear box and only turns around 17 rpm. And instead of shooting wood chips up to 9 metres, the attachment keeps most material within a small circle around the former stump.
The Stumpex is overall easier to clean up after and notably safer than other stump grinders available – for example, if you’ve got to remove stumps between a street and a pathway, you don’t have to put up barriers and stop traffic.
With Stumpex, less is more:
- No Carbide Tools to replace.
- Low maintenance (greasing and sharpening every 1,000 stumps).
- Low RPM Auger Bit (7-16 RPM) leads to easy clean-up.
- No high speed flying debris for a safer work zone.
- Fraction of work time compared to conventional stumpers.
STUMP HOGS (SPECIAL ORDER ONLY)
Our Stump Hog models of grinder are a traditional cutting wheel design offering high power and output to grind through large and difficult stumps.
Excavators: the reach, mobility, and precise control using the curling action of the excavator make it the ideal platform for stump grinding. With Fecon excavator stump grinders the operator always has a full view of the disk and stump.
Skid steers and hydraulic machines: Stump Hogs can be matched with most brands of high horsepower, high-flow skid steers or loaders and forestry prime movers. Fecon provides engineering support to ensure you are getting the best model and hydraulic protection for your carrier.
Also available are high performance stump grinders for hydraulic tractors and forestry prime movers on tracks or wheels. Equip each stumper with pin on or quick attach mounts to interface with your machine of choice and will work efficiently with the standard hydraulics of most carriers.
MODELS AVAILABLE
For excavators, backhoes & reach mowers:
Model: | Stumpex 8 | Stumpex 15 | Stump Hog 45 | Stump Hog 100 |
| Excavator Size (Tonnes): | 8-14 | 15-20 | 20+ | 20+ |
| Max Cut Diameter (mm): | 812 | 812 | 914 | 914 |
| Flow Range (LPM): | 75-159 / 40674 Nm Torque | 151-246 / 67790 Nm Torque | 152-190 | 360-398 |
| Weight (kg): | 675 | 907 (plus head plate) | 1125 (plus head plate) | 1170 (plus head plate) |
For skid steers, track loaders & other hydraulic machines:
Model: | Stumpex 8 | Stump Hog 270 |
| Max Cut Diameter (mm): | 812 | 660 |
| Flow Range (LPM): | 75-159 | 119-190 |
| Weight (kg): | 675 | 760 |
